解除合約在支付相應的違約金后去營業廳就能辦理。
電信合約卡一般都是需要用到合約結束的,如果強行注銷的話是需要交納違約金的。合約卡如果不繼續使用,要及時在營業廳辦理注銷,合約期內注銷,需要繳納違約金。 如果不注銷又長期欠費,可能會被電信記錄進入黑名單,影響個人信譽記錄 。 注銷合約卡方法:
第一步、準備個人資料和開號憑據,若是實在找不到就攜帶本人身份證。
第二步、想要注銷的號碼最好不要是欠費狀態,欠費狀態注銷號碼是需要補交欠費款項的,所以說有些手機的信用額度很高,最好不要使勁的去透支,透支過多想注銷最后還是要補還余款,不補還就會列入黑名單,影響個人信譽記錄。
第三步、想注銷手機電話卡,一定要找到手機開戶點辦理注銷業務。
第四步、帶上個人資料和開號憑證到指定營業廳直接找客服幫忙辦理注銷業務。
1.一般來說,在合同期內,合約機是不能解除合同的,因為合同在當時簽訂后就生效了,合同到期才自動解除。
2.如果用戶強行取消,需要支付一定的違約金。用戶必須與中國移動簽訂兩年的合同。合同里有簽約承諾,這兩年每個月都要有最低消費。
3.在合約期內,用戶必須使用合約機的手機卡,同時手機卡必須保證賬戶不會被注銷或停機。
4.因為手機卡是和身份證綁定的,一旦發現手機卡停機,會扣個人信用,情節嚴重的會上黑名單。
無法提早解約。
合約用戶由于合約規定不能停機、銷戶,并且不能辦理提前解約,你扔了,它要照??圪M,直至欠費停機,如果欠費停機,屬于違約,還要收取違約金,欠費停機3個月后有可能被銷號。實名制后付費用戶產生欠費,如果要不用就要去營業廳辦理銷戶,不然最后一個月扣費成功,欠費了才停機,這個欠費就會掛在你的名下,身份證件就會被列入黑名單,影響以后辦理聯通業務。
另外,欠費每天還要收取千分之三的滯納金,積少成多,以后會有催繳信和電話,到時候就顯得很麻煩,也劃不來,在欠費累積到一定額度后,聯通可以通過按照相關國家電信行業法規要求繳納欠費的,這是符合法律程序的。所以建議如果有欠費,在方便的時候還是盡早繳納比較好的。然后等合約到期后再辦理銷戶。
可以通過以下方式取消移動寬帶業務:
1、帶身份證原件到移動公司營業廳辦理銷戶,如安裝寬帶時候有付過光貓押金,需退還給移動公司,結算費用,方可正式銷戶,如果是銷戶代辦:需要代辦人帶上戶主身份證原件及代辦人本人身份證原件到服務廳辦理。
2、在移動官網溝通100營業廳辦理預銷戶。如客戶包年到期未使用(未產生流量),可以向營業人員提出減免當月產生的費用,營業人員待核實后將予以減免;如用戶對費用有疑問,您可以至移動溝通100營業廳咨詢。寬帶包年到期當月,您可以至移動溝通100營業廳辦理預銷戶,次月至移動溝通100營業廳辦理正式銷戶。
有三種辦法來查詢合約情況。
第一種是打運營商的客服電話來查詢。運營商的客服電話是為用戶服務的渠道熱線,通過客服電話可以查詢具體的合約情況。
第二種情況是登錄手機營業廳,在已訂業務里查看具體的合約情況。
第三種是去線下營業廳查詢
1.用戶可撥打10010人工臺,通過聯通客服代表核實其合約是否可在線取消。 如可以,可通過10010客服代表處在線取消該合約。
2.用戶可帶身份證件和服務密碼,前往歸屬地自有營業廳取消合約。
3、用戶可通過短信方式取消合約活動。如用戶所辦理合約活動有短信取消方式,可聯系10010客服代表獲取相關短信取消方式后,手動通過短信發送方式,取消該合約。
4、溫馨提醒:在網類合約,一般為優惠合約,在合約期間需在網使用,無法進行取消合約、停機保號、過戶、銷戶等業務辦理。在辦理時,人員或網頁均有相關說明,經用戶同意后方才生效。故此類優惠合約,無法提前取消。
之前看了Mahout官方示例 20news 的調用實現;于是想根據示例的流程實現其他例子。網上看到了一個關于天氣適不適合打羽毛球的例子。
訓練數據:
Day Outlook Temperature Humidity Wind PlayTennis
D1 Sunny Hot High Weak No
D2 Sunny Hot High Strong No
D3 Overcast Hot High Weak Yes
D4 Rain Mild High Weak Yes
D5 Rain Cool Normal Weak Yes
D6 Rain Cool Normal Strong No
D7 Overcast Cool Normal Strong Yes
D8 Sunny Mild High Weak No
D9 Sunny Cool Normal Weak Yes
D10 Rain Mild Normal Weak Yes
D11 Sunny Mild Normal Strong Yes
D12 Overcast Mild High Strong Yes
D13 Overcast Hot Normal Weak Yes
D14 Rain Mild High Strong No
檢測數據:
sunny,hot,high,weak
結果:
Yes=》 0.007039
No=》 0.027418
于是使用Java代碼調用Mahout的工具類實現分類。
基本思想:
1. 構造分類數據。
2. 使用Mahout工具類進行訓練,得到訓練模型。
3。將要檢測數據轉換成vector數據。
4. 分類器對vector數據進行分類。
接下來貼下我的代碼實現=》
1. 構造分類數據:
在hdfs主要創建一個文件夾路徑 /zhoujainfeng/playtennis/input 并將分類文件夾 no 和 yes 的數據傳到hdfs上面。
數據文件格式,如D1文件內容: Sunny Hot High Weak
2. 使用Mahout工具類進行訓練,得到訓練模型。
3。將要檢測數據轉換成vector數據。
4. 分類器對vector數據進行分類。
這三步,代碼我就一次全貼出來;主要是兩個類 PlayTennis1 和 BayesCheckData = =》
package myTesting.bayes;
import org.apache.hadoop.conf.Configuration;
import org.apache.hadoop.fs.FileSystem;
import org.apache.hadoop.fs.Path;
import org.apache.hadoop.util.ToolRunner;
import org.apache.mahout.classifier.naivebayes.training.TrainNaiveBayesJob;
import org.apache.mahout.text.SequenceFilesFromDirectory;
import org.apache.mahout.vectorizer.SparseVectorsFromSequenceFiles;
public class PlayTennis1 {
private static final String WORK_DIR = "hdfs://192.168.9.72:9000/zhoujianfeng/playtennis";
/*
* 測試代碼
*/
public static void main(String[] args) {
//將訓練數據轉換成 vector數據
makeTrainVector();
//產生訓練模型
makeModel(false);
//測試檢測數據
BayesCheckData.printResult();
}
public static void makeCheckVector(){
//將測試數據轉換成序列化文件
try {
Configuration conf = new Configuration();
conf.addResource(new Path("/usr/local/hadoop/conf/core-site.xml"));
String input = WORK_DIR+Path.SEPARATOR+"testinput";
String output = WORK_DIR+Path.SEPARATOR+"tennis-test-seq";
Path in = new Path(input);
Path out = new Path(output);
FileSystem fs = FileSystem.get(conf);
if(fs.exists(in)){
if(fs.exists(out)){
//boolean參數是,是否遞歸刪除的意思
fs.delete(out, true);
}
SequenceFilesFromDirectory sffd = new SequenceFilesFromDirectory();
String[] params = new String[]{"-i",input,"-o",output,"-ow"};
ToolRunner.run(sffd, params);
}
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("文件序列化失?。?#34;);
System.exit(1);
}
//將序列化文件轉換成向量文件
try {
Configuration conf = new Configuration();
conf.addResource(new Path("/usr/local/hadoop/conf/core-site.xml"));
String input = WORK_DIR+Path.SEPARATOR+"tennis-test-seq";
String output = WORK_DIR+Path.SEPARATOR+"tennis-test-vectors";
Path in = new Path(input);
Path out = new Path(output);
FileSystem fs = FileSystem.get(conf);
if(fs.exists(in)){
if(fs.exists(out)){
//boolean參數是,是否遞歸刪除的意思
fs.delete(out, true);
}
SparseVectorsFromSequenceFiles svfsf = new SparseVectorsFromSequenceFiles();
String[] params = new String[]{"-i",input,"-o",output,"-lnorm","-nv","-wt","tfidf"};
ToolRunner.run(svfsf, params);
}
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("序列化文件轉換成向量失敗!");
System.out.println(2);
}
}
public static void makeTrainVector(){
//將測試數據轉換成序列化文件
try {
Configuration conf = new Configuration();
conf.addResource(new Path("/usr/local/hadoop/conf/core-site.xml"));
String input = WORK_DIR+Path.SEPARATOR+"input";
String output = WORK_DIR+Path.SEPARATOR+"tennis-seq";
Path in = new Path(input);
Path out = new Path(output);
FileSystem fs = FileSystem.get(conf);
if(fs.exists(in)){
if(fs.exists(out)){
//boolean參數是,是否遞歸刪除的意思
fs.delete(out, true);
}
SequenceFilesFromDirectory sffd = new SequenceFilesFromDirectory();
String[] params = new String[]{"-i",input,"-o",output,"-ow"};
ToolRunner.run(sffd, params);
}
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("文件序列化失敗!");
System.exit(1);
}
//將序列化文件轉換成向量文件
try {
Configuration conf = new Configuration();
conf.addResource(new Path("/usr/local/hadoop/conf/core-site.xml"));
String input = WORK_DIR+Path.SEPARATOR+"tennis-seq";
String output = WORK_DIR+Path.SEPARATOR+"tennis-vectors";
Path in = new Path(input);
Path out = new Path(output);
FileSystem fs = FileSystem.get(conf);
if(fs.exists(in)){
if(fs.exists(out)){
//boolean參數是,是否遞歸刪除的意思
fs.delete(out, true);
}
SparseVectorsFromSequenceFiles svfsf = new SparseVectorsFromSequenceFiles();
String[] params = new String[]{"-i",input,"-o",output,"-lnorm","-nv","-wt","tfidf"};
ToolRunner.run(svfsf, params);
}
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("序列化文件轉換成向量失??!");
System.out.println(2);
}
}
public static void makeModel(boolean completelyNB){
try {
Configuration conf = new Configuration();
conf.addResource(new Path("/usr/local/hadoop/conf/core-site.xml"));
String input = WORK_DIR+Path.SEPARATOR+"tennis-vectors"+Path.SEPARATOR+"tfidf-vectors";
String model = WORK_DIR+Path.SEPARATOR+"model";
String labelindex = WORK_DIR+Path.SEPARATOR+"labelindex";
Path in = new Path(input);
Path out = new Path(model);
Path label = new Path(labelindex);
FileSystem fs = FileSystem.get(conf);
if(fs.exists(in)){
if(fs.exists(out)){
//boolean參數是,是否遞歸刪除的意思
fs.delete(out, true);
}
if(fs.exists(label)){
//boolean參數是,是否遞歸刪除的意思
fs.delete(label, true);
}
TrainNaiveBayesJob tnbj = new TrainNaiveBayesJob();
String[] params =null;
if(completelyNB){
params = new String[]{"-i",input,"-el","-o",model,"-li",labelindex,"-ow","-c"};
}else{
params = new String[]{"-i",input,"-el","-o",model,"-li",labelindex,"-ow"};
}
ToolRunner.run(tnbj, params);
}
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("生成訓練模型失??!");
System.exit(3);
}
}
}
package myTesting.bayes;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import org.apache.commons.lang.StringUtils;
import org.apache.hadoop.conf.Configuration;
import org.apache.hadoop.fs.Path;
import org.apache.hadoop.fs.PathFilter;
import org.apache.hadoop.io.IntWritable;
import org.apache.hadoop.io.LongWritable;
import org.apache.hadoop.io.Text;
import org.apache.mahout.classifier.naivebayes.BayesUtils;
import org.apache.mahout.classifier.naivebayes.NaiveBayesModel;
import org.apache.mahout.classifier.naivebayes.StandardNaiveBayesClassifier;
import org.apache.mahout.common.Pair;
import org.apache.mahout.common.iterator.sequencefile.PathType;
import org.apache.mahout.common.iterator.sequencefile.SequenceFileDirIterable;
import org.apache.mahout.math.RandomAccessSparseVector;
import org.apache.mahout.math.Vector;
import org.apache.mahout.math.Vector.Element;
import org.apache.mahout.vectorizer.TFIDF;
import com.google.common.collect.ConcurrentHashMultiset;
import com.google.common.collect.Multiset;
public class BayesCheckData {
private static StandardNaiveBayesClassifier classifier;
private static Map<String, Integer> dictionary;
private static Map<Integer, Long> documentFrequency;
private static Map<Integer, String> labelIndex;
public void init(Configuration conf){
try {
String modelPath = "/zhoujianfeng/playtennis/model";
String dictionaryPath = "/zhoujianfeng/playtennis/tennis-vectors/dictionary.file-0";
String documentFrequencyPath = "/zhoujianfeng/playtennis/tennis-vectors/df-count";
String labelIndexPath = "/zhoujianfeng/playtennis/labelindex";
dictionary = readDictionnary(conf, new Path(dictionaryPath));
documentFrequency = readDocumentFrequency(conf, new Path(documentFrequencyPath));
labelIndex = BayesUtils.readLabelIndex(conf, new Path(labelIndexPath));
NaiveBayesModel model = NaiveBayesModel.materialize(new Path(modelPath), conf);
classifier = new StandardNaiveBayesClassifier(model);
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("檢測數據構造成vectors初始化時報錯。。。。");
System.exit(4);
}
}
/**
* 加載字典文件,Key: TermValue; Value:TermID
* @param conf
* @param dictionnaryDir
* @return
*/
private static Map<String, Integer> readDictionnary(Configuration conf, Path dictionnaryDir) {
Map<String, Integer> dictionnary = new HashMap<String, Integer>();
PathFilter filter = new PathFilter() {
@Override
public boolean accept(Path path) {
String name = path.getName();
return name.startsWith("dictionary.file");
}
};
for (Pair<Text, IntWritable> pair : new SequenceFileDirIterable<Text, IntWritable>(dictionnaryDir, PathType.LIST, filter, conf)) {
dictionnary.put(pair.getFirst().toString(), pair.getSecond().get());
}
return dictionnary;
}
/**
* 加載df-count目錄下TermDoc頻率文件,Key: TermID; Value:DocFreq
* @param conf
* @param dictionnaryDir
* @return
*/
private static Map<Integer, Long> readDocumentFrequency(Configuration conf, Path documentFrequencyDir) {
Map<Integer, Long> documentFrequency = new HashMap<Integer, Long>();
PathFilter filter = new PathFilter() {
@Override
public boolean accept(Path path) {
return path.getName().startsWith("part-r");
}
};
for (Pair<IntWritable, LongWritable> pair : new SequenceFileDirIterable<IntWritable, LongWritable>(documentFrequencyDir, PathType.LIST, filter, conf)) {
documentFrequency.put(pair.getFirst().get(), pair.getSecond().get());
}
return documentFrequency;
}
public static String getCheckResult(){
Configuration conf = new Configuration();
conf.addResource(new Path("/usr/local/hadoop/conf/core-site.xml"));
String classify = "NaN";
BayesCheckData cdv = new BayesCheckData();
cdv.init(conf);
System.out.println("init done...............");
Vector vector = new RandomAccessSparseVector(10000);
TFIDF tfidf = new TFIDF();
//sunny,hot,high,weak
Multiset<String> words = ConcurrentHashMultiset.create();
words.add("sunny",1);
words.add("hot",1);
words.add("high",1);
words.add("weak",1);
int documentCount = documentFrequency.get(-1).intValue(); // key=-1時表示總文檔數
for (Multiset.Entry<String> entry : words.entrySet()) {
String word = entry.getElement();
int count = entry.getCount();
Integer wordId = dictionary.get(word); // 需要從dictionary.file-0文件(tf-vector)下得到wordID,
if (StringUtils.isEmpty(wordId.toString())){
continue;
}
if (documentFrequency.get(wordId) == null){
continue;
}
Long freq = documentFrequency.get(wordId);
double tfIdfValue = tfidf.calculate(count, freq.intValue(), 1, documentCount);
vector.setQuick(wordId, tfIdfValue);
}
// 利用貝葉斯算法開始分類,并提取得分最好的分類label
Vector resultVector = classifier.classifyFull(vector);
double bestScore = -Double.MAX_VALUE;
int bestCategoryId = -1;
for(Element element: resultVector.all()) {
int categoryId = element.index();
double score = element.get();
System.out.println("categoryId:"+categoryId+" score:"+score);
if (score > bestScore) {
bestScore = score;
bestCategoryId = categoryId;
}
}
classify = labelIndex.get(bestCategoryId)+"(categoryId="+bestCategoryId+")";
return classify;
}
public static void printResult(){
System.out.println("檢測所屬類別是:"+getCheckResult());
}
}
1. 請介紹一下WebGIS的概念和作用,以及在實際應用中的優勢和挑戰。
WebGIS是一種基于Web技術的地理信息系統,通過將地理數據和功能以可視化的方式呈現在Web瀏覽器中,實現地理空間數據的共享和分析。它可以用于地圖瀏覽、空間查詢、地理分析等多種應用場景。WebGIS的優勢包括易于訪問、跨平臺、實時更新、可定制性強等,但也面臨著數據安全性、性能優化、用戶體驗等挑戰。
2. 請談談您在WebGIS開發方面的經驗和技能。
我在WebGIS開發方面有豐富的經驗和技能。我熟悉常用的WebGIS開發框架和工具,如ArcGIS API for JavaScript、Leaflet、OpenLayers等。我能夠使用HTML、CSS和JavaScript等前端技術進行地圖展示和交互設計,并能夠使用后端技術如Python、Java等進行地理數據處理和分析。我還具備數據庫管理和地理空間數據建模的能力,能夠設計和優化WebGIS系統的架構。
3. 請描述一下您在以往項目中使用WebGIS解決的具體問題和取得的成果。
在以往的項目中,我使用WebGIS解決了許多具體問題并取得了顯著的成果。例如,在一次城市規劃項目中,我開發了一個基于WebGIS的交通流量分析系統,幫助規劃師們評估不同交通方案的效果。另外,在一次環境監測項目中,我使用WebGIS技術實現了實時的空氣質量監測和預警系統,提供了準確的空氣質量數據和可視化的分析結果,幫助政府和公眾做出相應的決策。
4. 請談談您對WebGIS未來發展的看法和期望。
我認為WebGIS在未來會繼續發展壯大。隨著云計算、大數據和人工智能等技術的不斷進步,WebGIS將能夠處理更大規模的地理數據、提供更豐富的地理分析功能,并與其他領域的技術進行深度融合。我期望未來的WebGIS能夠更加智能化、個性化,為用戶提供更好的地理信息服務,助力各行各業的決策和發展。
這塊您需要了解下stm32等單片機的基本編程和簡單的硬件設計,最好能夠了解模電和數電相關的知識更好,還有能夠會做操作系統,簡單的有ucos,freeRTOS等等。最好能夠使用PCB畫圖軟件以及keil4等軟件。希望對您能夠有用。